TSAT 3000 - PORT_BIT_RATE [N]; PORT_DATA_BITS [N]; PORT_STOP_BITS [N]

TSAT 3000 - Telemetry and data transfer via SATellite
TSAT 3000 Configuration Parameter Description, January 2013 Page 15 of 124
3.1.5 PORT_BIT_RATE [n]
Default 38400, Range 50…115200
Set Baud-Rate [bits / second].
• Not Used when PORT is connected to SOCKET or IP-STACK.
• Used when PORT is connected to Local-COM, or Remote-COM via “TSAT Comport Server”.
Note: Minimum Local-COM Baud-Rate is dependent on KERNEL version:
KERNEL version Minimum Baud-Rate
<= 3.2.1 – i.e. Release 3.4.0 300
>= 3.2.2 – i.e. Release 3.5.0 100
3.1.6 PORT_DATA_BITS [n]
Default 8, Range 5…8
Set Data-Bits [bits / character]
• Not Used when PORT is connected to SOCKET or IP-STACK.
• Used when PORT is connected to Local-COM, or Remote-COM via “TSAT Comport Server”.
Value Description Note
5 5 bits character Not supported by Local-COM
6 6 bits character Not supported by Local-COM
7 7 bits character
8 8 bits character
3.1.7 PORT_STOP_BITS [n]
Default 1, Range 1…2
Set Stop-Bits.
• Not Used when PORT is connected to SOCKET or IP-STACK.
• Used when PORT is connected to Local-COM, or Remote-COM via “TSAT Comport Server”.
Value Description
1 1 stop bit
2 2 stop bits