TSAT 3000 - Page 112

TSAT 3000 - Telemetry and data transfer via SATellite
TSAT 3000 Configuration Parameter Description, January 2013 Page 112 of 124
16
0x0001.0000
DEBUG_FLOWCONTROL
MSG when Application is flow-controlled.
17
0x0002.0000
DEBUG_LINK_QUEUES
MSG from all Link Queues (stored packets + age).
• Transmission priority queue
• Secure-Link Acknowledge queue
• Secure-Link Receive queue
• Packetizer Rx queue
18
0x0004.0000
DEBUG_LINK_RX_DATA
MSG when Packetizer Rx packet from Link.
RT address filter:
UTL_DEBUG_RT_ADDRESS.
19
0x0008.0000
DEBUG_LINK_TX_DATA
MSG when packets are stored in Transm-Queue.
RT/GROUP filter:
UTL_DEBUG_RT_ADDRESS.
20
0x0010.0000
DEBUG_COM
MSG from COM interfaces.
21
0x0020.0000
DEBUG_SOCKET
MSG from SOCKET interfaces.
22
0x0040.0000
DEBUG_NETWORK
MSG from IP-Network interface.
Ver <= 30.6.1: Also MSG Rx/Tx IP packets.
See also
UTL_DEBUG_MASK_B.
23
0x0080.0000
DEBUG_APPLICATION
MSG from PORT module.
24
0x0100.0000
DEBUG_LOG
MSG from LOG module.
25
0x0200. 0000
DEBUG_RTC
MSG from Real-Time-Clock module.
26
0x0400.0000
DEBUG_POLL
MSG from POLL module (state change).
27
0x0800.0000
DEBUG_ADDR
HUB Ver >= 30.2.0: MSG when GROUP information
(received from RTs) is changed at the HUB side.
28
0x1000.0000
DEBUG_DISABLE_BAD_TIMING
Suppress WARNINGs related to “Bad Timing”.
29
0x2000.0000
DEBUG_POOL
Trace and count packets (get / send / receive / put).
30
0x4000.0000
DEBUG_CCU_MSG_TIME
Insert Time-Stamp in all MSGs and WARNINGs.
31
0x8000.0000
DEBUG_WARNINGS_
IMMEDIATELY
Report all WARNINGs immediately. I.e. don’t delay,
accumulate, and print each second – which is the
normal operation for many of the WARNINGs.