TSAT 3000 - Page 120

TSAT 3000 - Telemetry and data transfer via SATellite
TSAT 3000 Configuration Parameter Description, January 2013 Page 120 of 124
Bit Mask Mnemonic Description
16
0x0001.0000
UTILITY_SEARCH_
TEST_BW
Ver >= 31.7.1: Use the Spectrum-Decode function
as used in 31.6.0 … 31.7.0. This function doesn’t
always work well for 9600 carriers.
17
0x0002.0000
UTILITY_SEARCH_
TEST_OCXO_STABILIZE
HUB Ver >= 31.7.1: Accept OCXO drift 10Hz/sec.
Otherwise, 2 Hz/sec is the limit.
18
0x0004.0000
UTILITY_SEARCH_
DSP_IS_HUB
RT Ver >= 31.8.0: Configure DSP in HUB-mode, so
that it will be transmitting continuously.
19 - 31
0xFFF8.0000
n/a