16
2 Key Operation
16
Key Operation
Chapter
2
4. Once the correct setting value is input, press the key to confirm the setting
value.
■(Example 2: Setting from numerical value input)
Setting the 1/4 scale division to OFF.
The 1/4 scale division is item 7 in setting mode 3 (Refer to the setting mode calibration chart in
P.13.)
The normal status (weight display) is shown below.
1. Pressing the key and key in order will change the status to waiting for
input and the rightmost number will flash.
2. Confirm the change by pressing the key and the key in order.
2-4. How to abort a setting
Returns to normal display (setting mode 0) when the key is pressed while the setting mode
number is displayed.
While changing the setting value after selecting an item, press the to skip that item. (Display
returns to showing the setting mode number.)
kg
Once the setting is complete, the display returns
Setting mode number
Current setting mode number
to show the setting mode number and the current
weight value display.
Setting is now complete.
kg
Current weight value
The normal status is setting mode 0.
The mode number is not displayed when in mode 0.
Setting mode number
Current setting mode number
Flashing means waiting for input.
kg
kg
The setting mode number after changing
Returns to weight value display after confirming.
The setting mode number is displayed on the left.
To Next Page
Loading...
Need help?
General
