Smart Plus (PHT-35LHS)
Technical Manual
VT-TECH-Smart Plus-001
COPYRIGHT© 2018 VATECH.
5) Click READY.
6) Perform the image acquisition according to the Console Software guidance.
7) When the image acquisition is completed, run VAKCAP.exe
8) Click the Panorama tab > V Pan to open View16.
9) Click Brw and select Capture.raw to open the captured image.
Capture.raw file path :
C:\VCaptureSW\Acquisition\Ceph\AnyCeph\Fast\PAN folder
10) Select 50 in the M box and click the center of the flat washer.
To Next Page
Loading...
