Vatech Smart Plus PHT-35LHS - Smart Plus (PHT-35 LHS) Command List

Smart Plus (PHT-35LHS)
Technical Manual
VT-TECH-Smart Plus-001
173 / 188
COPYRIGHT© 2018 VATECH.
ALL RIGHTS RESERVED
2. Smart Plus (PHT-35LHS) Command List
 PANO mode command
Command
Description
[SPM_PANO]
Initialize into PANO mode
[SPM_CSNM]
Set PANO Normal mode
[SPM_CSFA]
Set PANO Fast mode
[SPM_ACSH]
Set Narrow Arch
[SPM_ACST]
Set Normal Arch
[SPM_ACSQ]
Set Wide Arch
[SPM_ACCH]
Set Child Arch
[SPM_SOR_]
Set Orthogonal Arch
[SPM_SBW_]
Set Bitewing mode
[SPM_TLA_]
Set TMJ Lateral mode
[SPM_TPA_]
Set TMJ PA mode
[SPM_SLA_]
Set Sinus Lateral mode
[SPM_SPA_]
Set Sinus PA mode
[SPM_CAAL]
Capture All areas
[SPM_CAFT]
Capture Front area
[SPM_CALT]
Capture Left area
[SPM_CART]
Capture Right area
[SPM_SSB_]
PANO Bright calibration capture
 CEPH mode command
Command
Description
[SPM_CEPH]
Initialize into CEPH mode
[SPM_CAMS]
Set Lateral mode (Image Quality: High Resolution)
[SPM_CBMS]
Set PA, SMV, Waters' View mode (Image Quality: High Resolution)
[SPM_CCMS]
Set Full Lateral mode (Image Quality: High Resolution)
[SPM_CDMS]
Set Carpus mode (Image Quality: High Resolution)
[SPM_CEMS]
Set Lateral mode (Image Quality: Green)
[SPM_CFMS]
Set PA, SMV, Waters' View mode (Image Quality: Green)
[SPM_CGMS]
Set Full Lateral mode (Image Quality: Green)
[SPM_CHMS]
Set Carpus mode (Image Quality: Green)
[SPM_SSB_]
CEPH Bright calibration capture
[SPM_CISC_000#]
Set CEPH mode option
(# = 0: Disable CEPH mode)
(# = 1: Enable SCAN CEPH mode)