Vermes MDS 358X - Table of Error Messages

Error Messages
VTK-TR-BA-072e-1 - User Manual MDS 358X Series
141
11.1 Table of Error Messages
The following table lists all error messages with their error code and when they might appear.
Error Code Error Message Related to When?
101
101 wrong valve
Valve
Start-up
102
102 wrong piezo type
Valve
Start-up
104
104 sensor communication error
Valve
Operation
190
190 incorrect valve data
Valve
Start-up, Operation
191
191 nozzle/tappet error > enter
Valve
Start-up
199
199 valve error escape for auxi.
Valve
Start-up
301
301 no valve present error
Valve
Start-up
302
302 actuator connection error
Valve
Operation
303
303 adjust error press enter
MDC
HW adjust
501 / -
501 valve defect error
or
maintenance needed
Valve
Start-up, Operation
502
502 MDV temp.high please wait
Valve
Start-up, Operation
601
601 USART buffer overflow
RS-232C
Operation
701
701 valve driver defect
MDC
Start-up, Operation
702
702 WD timeout press enter
MDC
Start-up, Operation
703
703 RS powsupply press enter
MDC
Start-up, Operation
810
810 communication error
MDC
Start-up, Operation
820
820 incorrect heater data
Heater
Start-up, Operation
830
830 wrong heater
Heater
Operation
840
840 heater unplugged
Heater
Operation
850
850 MDC not calibrated!
MDC
Start-up
855
855 incorrect bus data
MDC
Operation
860
860 incorrect cooler data
MDC
Operation
870
870 wrong cooler
Cooling
Start-up, Operation
875
875 cooler wrong PT100-signal
MDC
Start-up, Operation
880
880 cooler unplugged
Cooling
Operation
901
901 RAM-data error press enter
MDC Data
Start-up, Operation
902
902 EEPROM not formatted > enter
MDC Data
Start-up, Operation
903
903 EEPROM write error > enter
MDC Data
Operation
904
904 setup save error > enter
MDC Data
Operation
905
905 setup load error > enter
MDC Data
Operation
999
999 error in errorlist
MDC Data
Operation