Vermes MDS 358X - List of Figures 15 List of Figures; List of Figures

List of figures
VTK-TR-BA-072e-1 - User Manual MDS 358X Series
175
15 List of figures
Fig. 1: Front Side ........................................................................................ 21
Fig. 2: Back Side ......................................................................................... 23
Fig. 3: Connection for power supply 48 V DC – pin functions ................ 24
Fig. 4: Main menu ....................................................................................... 27
Fig. 5: Menu structure ................................................................................ 28
Fig. 6: Display main menu ......................................................................... 29
Fig. 7: Submenu „Pulse Parameters“ ....................................................... 29
Fig. 8: Message “Heater connected - press enter” .................................. 30
Fig. 9: Submenu “Cooler/Heater” ............................................................. 30
Fig. 10: Submenu “Cooler” .......................................................................... 31
Fig. 11: Submenu “Heater” ......................................................................... 32
Fig. 12: Before reaching the target temperature ...................................... 32
Fig. 13: The target temperature is reached ............................................... 32
Fig. 14: Submenu “Status” .......................................................................... 34
Fig. 15: Submenu “Scenario” ...................................................................... 35
Fig. 16: Submenu “Scenario-Def. 1” ........................................................... 36
Fig. 17: Submenu “Service-Option” ........................................................... 37
Fig. 18: Composition .................................................................................... 39
Fig. 19: Explosion view valve ...................................................................... 41
Fig. 20: Content ............................................................................................ 44
Fig. 21: Distance of the bores 45 mm ......................................................... 50
Fig. 22: Connecting the actuator cable – step 1 ......................................... 51
Fig. 23: Connecting the actuator cable – step 2 ......................................... 51
Fig. 24: Connector actuator cable - grip .................................................... 51
Fig. 25: Connecting the sensor cable – step 1 ............................................ 52
Fig. 26: Connecting the sensor cable – step 2 ............................................ 52
Fig. 27: Connector sensor cable - grip ....................................................... 53
Fig. 28: Switching Power Supply 48 V 4 A Push-Pull and its connector ... 53
Fig. 29: Heater MDH-48-BY ......................................................................... 54
Fig. 30: Heater cable 48 V ............................................................................ 54
Fig. 31: Flow Control Valve FCV-AC 6.0 M12 .............................................. 54
Fig. 32: Connection Cable for FCV-AC/HF M12 to MDC ............................. 55
Fig. 33: Connection diagram of MDS 358X ................................................ 55
Fig. 34: Valve with air cooling connected .................................................. 56
Fig. 35: Screwing tight the nozzle fixation nut .......................................... 57
Fig. 36: Adjust – Press [ADJ] ........................................................................ 58
Fig. 37: Message Adjust Screw OUT ............................................................ 58
Fig. 38: Screw open adjust screw ................................................................ 58
Fig. 39: Adjust – Press [ENTER] .................................................................... 58
Fig. 40: Message 500 Shots – Please Wait .................................................. 59