Vermes MDS 358X - MDT 306 - Torque Wrench Tool VM Black; Torques (in Cn.M); Tab. 15: MDT 306 - Torque Wrench Tool VM (Order No. 1015062); Tab. 16: Torques (in Cn.M)

General Instructions
VTK-TR-BA-072e-1 - User Manual MDS 358X Series
19
3.3.10 MDT 306 - Torque Wrench Tool VM black
The MDT 306 allows you to screw tight screws with an exactly set tightening torque. The value can be
adjusted continuously at the torque wrench tool.
You can order the necessary bits separately or together with the torque wrench as a set in a tool box
(MDTS 1 - Torque Wrench Tool Set TA, order no. 1013521). Additional information is in the Quick
Reference Guide “Torque Wrench Tool VM MDT 306”. You can download it from the VERMES homepage
(www.vermes.com). The necessary password you can get from our sales (sales@vermes.com
).
Intended Purpose:
1. Tightening screw
2. Tappet Centering Screw BY
3. Cartridge holder
4. Fluid box connector Luer-Lock
5. Nozzle Fixation Nut
6. MDC front panel
7. Valve screws
Tab. 15: MDT 306 - Torque Wrench Tool VM (Order no. 1015062)
3.3.11 Torques (in cN.m)
Element Gearing
Profile
Bit
Order No.
Torque (cN.m) Cross Reference
Min. Max.
Nozzle Fixation Nut
(hexagon screw, size M7)
1014204
150
180
Page 39
Screws for MDC front panel
(cross recess screw, size M3)
1013373
30
40
Page 49
Screws for cartridge holder M 3 x 5
(hexagon socket, size 2)
1013294
40
50
Page 45
Screws for isolation body M 3 x 5
(hexagon socket, size 2)
1013294
40
50
Page 41
Tightening screw
(gearing VM-A)
1014519
120
140
Page 45
Tappet centering screw BY
(gearing VM-B)
1014521
100
140
Page 41
Connector BY
(into mounting body PEEK, hexagon
socket, size 2.5)
1016631
70
80
Page 45
Connector BY
(into mounting body metal, hexagon
socket, size 2.5)
1016631
90
100
Page 45
Tab. 16: Torques (in cN.m)