Safety Notes
VTK-TR-BA-072e-1 - User Manual MDS 358X Series
Despite this comprehensive inherent safety structure, the operation of the microdispensing
system may entail danger
• For the health of the operator or a third party,
• For the system itself,
• Or give rise to another material damage.
Therefore, the use has strictly to be limited:
• To the intended application.
• To a state in which the technical safety of the system can be guaranteed (i.e. it is strictly
forbidden to start or continue the operation whenever a defect has become obvious).
You have to solve problems immediately, if they have a potential to impair safety aspects. For
this reason, it is imperative that this manual remains accessible any time without delay. In an
emergency, a short reaction time may be crucial.
If you transmit the system to any other department or institution, this manual must accompany
it.
2.3 Contracted Use
The system MDS 3580 has been designed for ultra-precise contactless dispensing of fluids in a
large range of viscosity (up to 2000000 mPas), in unfilled or filled state (also with abrasive
extenders), to be operated in a conveniently equipped industrial or laboratory environment.
Deviations from the instructions of this manual must explicitly be authorized by the
manufacturer (in writing); otherwise his liability with regard to the guarantee becomes null and
void.
This includes:
• Extensions and changes of design
• Modifications of the system, or spare parts not recommended by the manufacturer
• Inappropriate material selection (lack of compatibility between parts and dispensed fluids)
• Operation with damaged parts or after improvised repair
• Dispensing of fluids able to affect the functionality of the system (in case of doubt, consult
manufacturer)
• Manipulation or absence of integrated safety devices or sealings
• Repair by persons or enterprises not authorized by the manufacturer
• Operation beyond the scope of the specification
• Auxiliary equipment not recommended by the manufacturer
• The system is not admitted for applications in hazardous locations (ATEX zones)
In no event shall we be liable under our guarantee or any other provision of the agreement for
damages resulting from a violation of the instructions of this manual.
For further questions concerning current applications and modifications of the system with
respect to new requirements, contact the manufacturer, the responsible sales partner or the
Technical Support.
To Next Page
Loading...