Alarms
200
Table 6.2 below shows alarm definitions and will guide you
through troubleshooting. In these tables:
Set Count or Time of Condition shows the number of
occurences or amount of time (breath cycles or minutes) during
which the condition exists before the alarm will be triggered.
Numbers in parenthesis e.g., (20 with setting change) indicate an
alternative Set Count that takes effect immediately after
ventilation or after mode change.
Message is the small text message in the minimized alarm
window in the bottom left of the display.
Auto resetting indicates that clearing of the alarm is done
automatically, when the criterion is met.
To Next Page
Loading...
