VersaMed iVent201 - Configuration Screen; Choosing a Different Startup Screen

Care, Maintenance, and Tests
232
7.5 Configuration Screen
Use the Configuration Screen to adjust:
• Default startup weight
• Default start screen
• Default FiO
2
setting
To access the Configuration screen: call up the Main
menu, then choose Maintenance. When the red
Caution screen appears, select Yes. The Maintenance
menu appears. Select Configuration Screen.
WARNING: Several functions on the Configuration
Screen are designed only as service indicators and are
not accessible. Do not attempt to change any settings on
the iVent
201
unless you are certain what options you
wish to alter. Make sure settings are in accordance with
standard protocol within the hospital or patient facility.
7.5.1 Choosing a different Startup Screen
Use the Default start screen option if you would like the
iVent
201
to power up with a different screen.
1. From the Configuration screen
dial the control knob to
highlight ”Default start screen,”
then press.
2. A pop-up will appear showing
Main Screen, Monitoring, and
Home Care. Select which
screen you prefer, and press the
knob again.