iVent201 Operator's Manual
27
2 Setting Up
This section shows you how to set up the iVent
201,
including:
• Connecting to external AC or DC power
• Using the internal battery
• Verifying power condition
• Charging the battery, and proper recharging
procedure
• Connecting to cylinder, central supply-
system, or low-pressure oxygen
• Connecting the breathing circuit
• Installing heated humidification
• Connecting a synchronized nebulizer
• Connecting a pulse oximeter
• Installing filters at the ventilator’s inlet and
outlet
• Packing the unit in its optional transportation
case
To Next Page
