VersaMed iVent201 - Default Fio Setting; Versamed Service Functions

Care, Maintenance, and Tests
234
7.5.3 Default FiO
2
Setting
Use the Default FiO
2
setting option if you need to change the
default iVent
201
FiO
2
setting.
1. From the Configuration screen
dial the control knob to
highlight ”Default FiO
2
Setting,” then press.
2. A pop-up will appear offering a
range of choices: 21%, 40%, 60%,
and 100%. Make the desired
selection and press the knob
again.
The Configuration screen will return with the newly-selected
startup screen highlighted. When the iVent
201
is restarted, it
will default to the new O
2
setting.
7.6 VersaMed Service Functions
Warning: The service screen is meant for use by
VersaMed qualified and trained personnel only. The
technical log book is also meant for VersaMed
authorized personnel. Do not make changes to the
service screen menus unless you are told to do this by
trained VersaMed service technicians.