VersaMed iVent201 - Changing Ventilation Parameters - Overview

Operating the iVent201 – Setting Modes and Parameters
74
3.1.5 Changing Ventilation Parameters -
Overview
CAUTION: Only a fully qualified professional should
change these settings.
The iVent
201
provides two different ways to change ventilation
parameters: through the Main screen and through the Mode
Parameters screen.
⇒ If you wish to quickly change one parameter setting, the
fastest way is through the Main screen. If you need to
adjust several settings at once, call up the Mode
Parameters screen and make each required adjustment.
When you have set each parameter, you can accept all of
them at once.
1. Through the Main screen:
a) Return to the Main
screen -- if you are not
already there, press the
Clear button until you
return to it.
b) Turn the control knob
to select the parameter
you want to adjust.
c) Press the control knob
d) Adjust the setting to the
desired value.