iVent201 Operator's Manual
75
e) Press the control knob
again to confirm your
changes and return to
the Main screen.
2. Through the Mode Parameter screen:
a) If you are not already in the desired
Parameter window, from the Main
window, choose the Mode Selection
box and select the desired ventilation
mode.
b) Dial the control knob to select the
particular setting you wish to change.
c) Press the knob to call up the setting’s
control window.
d) Turn the knob until the parameter has
been changed to the desired level or
value.
e) Press the knob again to “lock in” the
setting. You will be returned to the
Mode screen.
f) Continue through the other
parameter options, choosing and
changing until you have set all the
values you want. Once you have
finished, return to the Main
Window by highlighting Accept on
the bottom of the screen. Press the
knob and your new selections will
be saved.
To Next Page
Loading...
