iVent201 Operator's Manual
233
NOTE: Not all screens are operational in all iVent
201
models.
The Configuration screen will return with the newly-
selected startup screen highlighted. When the iVent
201
is
restarted, the screen you’ve chosen will appear.
7.5.2 Setting the startup weight
The iVent
201
defaults to a patient weight of 70+kg. To change
the startup default:
1. From the Configuration screen
dial the control knob to
highlight ”Default start
weight,” then press.
2. A pop-up will appear showing
a range of choices from 10 to
>70, as well as Last. Select the
desired weight, and press the
knob again.
The Configuration screen will return, with the newly-selected
weight highlighted. When the iVent
201
is restarted, the first
screen will appear with the weight you’ve selected highlighted
⇒ Note that the weight selection does not take effect until
the ventilator is restarted. If you need to change or restore
the currently select weight, use Restore Defaults from the
Main Menu (see section 3.3.5).
To Next Page
Loading...
