4-8 Account Code
Account Code
Forced Verified
Description
When enabled, you must dial an account code in order to make an outgoing call on a CO
line. The system compares the code you dialed with those in the Account Code Table. If a
match is found, you can make the outgoing call.
Operation
1. Press an idle CO line button.
2. When you hear a tone, dial a valid account code.
3. Upon hearing confirmation tone and dial tone, you may now dial on the line.
4. The account code will be displayed in the SMDR call record printout.
5. If an error occurs, you may re-dial a new account code by returning to Step 1.
Conditions
If you dial an invalid account code, you will hear error tone and will not be able to
access the line. An Executive telephone will display CALL RESTRICTED.
When you dial a valid account code, your telephone is still monitored for toll
restriction according to the Class of Service (COS) assigned to your telephone.
Unforced/Unverified
Description
You may dial a personal or departmental account code for future tracking of time spent
on customer accounts.
Operation
1. Press an idle line button.
2. Press [FEAT].
Table 4-2: System Numbering Plan
DHS DHS-E PARAMETERS
01-12 700-717 CO Line Range
10-81 100-195 Station Numbers
82-89 800-807 Hunt Groups / Voice Mail Group
9/0 9/0 CO Line Group Access Code (9 is the default code for CO
Line access.)
0/9 0/9 Operator Code (0 is the default system Operator
Attendant code.)
To Next Page
Loading...
