Vodavi Starplus DHS - Recall (Transfer Recall); Reminder Tones

4-86 Recall (Transfer Recall)
Operation
1. As you dial on a dial pulse CO line, dial [✳]. All subsequent digits will be sent as DTMF
digits.
Conditions

The dialing conversion can only be from Pulse Mode to Tone (DTMF) mode.
Recall (Transfer Recall)
Description
Transferred CO lines will recall to the transferring station if the call is unanswered after
the Recall Time expires. During the recall, the outside party continues to hear the transfer
Ring Back tone, and the CO line returns to System Hold.
Operation
1. When a transferred CO line recalls, the display at an Executive Key Telephone will
indicate where the initial transfer was routed:
Reminder Tones
Description
If you have Do Not Disturb or Call Forward enabled, you will hear a Reminder Tone
whenever you access intercom dial tone. The Reminder Tone is a distinctive interrupted
stutter dial tone. Once you dial a digit, the Reminder Tone is removed until the next time
you access intercom.
Pulse to Tone Switch-Over can be programmed in any Speed Dial bin.
LNx RECALL
STATION xx
Recalls are not directed to the programmed Alternate Attendant station.