Message 4-71
To send a pre-programmed message:
1. Press [next]. The display shows:
2. Continue pressing [next] until the desired message is displayed. The programmed
messages are as listed in Table 4-9:
3. Press [send].
To view a message:
1. The Message Wait button will flash and the display shows:
2. Press [show] to display the message sent to you.
Table 4-8: Dial Pad Key Programming
Depressions: 123456789✳ 0#
1st
*
* Dial Key [1] is used to select special characters. Refer to
Letter Scheme
. Depending on the Letter
Scheme selected (programmed), Dial Key 1 may be used to insert various special characters.
ADG JMPTW
†
† Dial
[
✻
]
before a Dial Key to insert the number on the dial pad key instead of a letter in this character
position.
When
[
✻
]
is pressed after a letter has been selected for this character position, the selected letter is
forced to lower case.
Q
‡
‡ In some cases, you may wish to select letters accessed by the same dial pad key. After you select the first
letter, dial [#] to accept that letter and advance to the next position to dial the next letter. For instance, to
spell TOM you would dial [8] + [6] + [6] + [6] + [#] + [6].
Dial [#] to insert a space.
2nd
BEHKNRUX Z
3rd
CF I LOSVY
CALL OPERATOR
send next
Table 4-9: Available Outgoing Pre-Programmed Messages
CALL OPERATOR VISITORS WAITING
CALL HOME URGENT
CALL SCHOOL COME SEE ME
MSG FROM STA xx
show del
To Next Page
Loading...
