Feature Button Programming 4-55
Feature Button Programming
Description
Depending upon the telephone model, 8 or 20 programmable feature buttons are
available. The Basic model has eight dual-colored feature buttons for CO line, station, or
feature access code assignments. The Enhanced and Executive models have 20 dual-
colored programmable feature buttons.
All system feature codes may be stored on the programmable feature buttons for one-
button operation. Certain programmed feature buttons will light when activated (DND,
Call Forward, DSS/BLF, etc.), while others do not, such as Call Pick-Up, Background Music,
Last Number Redial.
Features are separated into three distinct categories for programming on a button: CO
line, station, or feature.
Operation
Basic and Enhanced Telephones
To program a feature button:
1. Press [FEAT]
2. Dial [#] + [3]
3. Press the desired feature button.
To program a system feature button:
1. Dial [2]
2. Press [FEAT]
3. Dial the system feature code.
4. Press [HOLD]
To program DSS console buttons:
1. Press [FEAT]
2. Dial [#] + [5]
3. Press a Programmable Feature Button.
To program a DSS/BLF button:
1. Dial [1]
2. Dial 2-digit DHS or 3-digit DHS-E station number (10-81) (100-195).
3. Press [HOLD]
To program a CO line button: (DHS only)
1. Dial [0]
2. Dial the CO line number or code for a CO line group. Refer to the table below for CO
Line Codes.
3. Press [HOLD]
To Next Page
Loading...
