4-82 Station Lock/Unlock
2. If the digit [9] is dialed, the DHS is aware that this call is being placed on a PBX trunk
(outgoing call).
3. A hyphen (-) is inserted automatically after dialing 9 for better display clarity.
Subsequent digits dialed are displayed after the hyphen.
Conditions
The PBX access code may be 1 or 2 digits.
After entering PBX access code, the system will automatically stop dialing for a
specified time (1 - 9 secs programmable) and then continue the dialing.
Station Lock/Unlock
Description
You may use this feature to prevent unauthorized outside calling from your telephone.
The feature code is also used to program your private 4-digit password number.
Operation
Basic and Enhanced Telephones
To lock the telephone:
1. Press [FEAT].
2. Dial [9] + [7].
DHS DHS-E
CO LINE 1
OR
CO LINE 700
9-
9-15551212
When the PBX CODE is programmed, the DHS will apply station toll restriction when the
next number is dialed. LNR and ABR will recognize the code and automatically insert a
pause following the code. At default, no CO line is type PBX, the PBX access code is 9, and
the PBX Auto Pause Insertion time is one second.
Use of Station Lock [Feat 97] will restrict access to 911.
To Next Page
Loading...
