6-30 Resource Configuration
Default
The DHS/DHS-E Letter Scheme is [0] and has a programmable range of 0/1/2/3/4/5.
Attendant
One station may be assigned the attendant station. This station will receive all recall
indications and calls not properly routed.
Default
The DHS/DHS-E default settings and Station Attendant ranges are:
Attendant Station DHS = 10
Attendant Station DHS-E = 100
Programmable range:
Attendant DHS = 10-81
Attendant DHS-E = 100-195
Alternate Attendant
One station may be assigned the Alternate Position. This station will receive all CO
ringing in over-flow fashion from the attendant station. When calls ring longer than the
Ring Alternate Position Time, these calls will begin to ring at the Alternate station.
Default
The DHS/DHS-E default settings and Alternate Attendant ranges are:
Alternate Atd DHS/DHS-E = Empty
Table 6-3: Letter Type
1
st
2
nd
3
rd
4
th
5
th
6
th
Scheme 0
Scheme 1
Scheme 2
Scheme 3
Scheme 4
Scheme 5
Character for n
th
depressions of dial key "1".
To Next Page
Loading...
