6-32 Resource Configuration
User Password
Each station in the system is assigned a default password of 0000. This may be changed if
the associated security feature operation (Phone Lock, Remote COS, etc.) is required. This
allows the password to be viewed but not modified.
Default
The DHS/DHS-E User Password is 0000, and has a programmable range from 0000-9999.
User Names
A User Name may be assigned to each station in the system. This can be useful as an
administrative aid as well as providing a user friendly prompt at display telephones while
idle and during call processing. If not programmed, the display at Executive Key
Telephones will display STATION. Multiple depressions of the dial pad keys cause
alphabet characters to appear. Use the following chart when programming User Names:
Table 6-4: User Name Programming
Key 1st Depression 2ndDepression 3rd Depression
1 Special Characters
2A B C
3D E F
4G H I
5J K L
6M N O
7P R S
8T U V
9W X Y
[ Before pressing a number key = insert a numeral instead of a letter
After a letter selected = force lower case
0Q Z_and moves to the
next position.
# (space) and moves to the next position
To Next Page
Loading...
