4-92 Station Feature Status Check
To dial a number stored in Speed Dial:
1. Press [FEAT].
2. Dial [1]. At an Executive Key Telephone, the display shows the following:
3. Dial the desired bin number (00-99).
Conditions
Only an Executive Key Telephone can program System Speed Dial bins using
Attendant Administration.
System Speed Bin 99 is used for External Call Forward. (DHS requires the optional
module.)
If you access an empty bin, the display will show SPEED NO IS EMPTY.
Station Feature Status Check
Description
The Executive Key Telephone user can quickly determine the status of all user-controlled
features. This feature is useful for the technician as well as the user since some feature
conditions may not be evident if they are not programmed on an available
programmable feature button. The current status can be observed using the soft
interactive buttons.
Operation
1. Press [FEAT]
2. Dial [#] + [8]. The display shows the contents of the Last Number Redial memory.
3. Press [next]. The display shows the contents of the Save Dialed Number memory.
4. Continue pressing [next] to display the status of the remaining features:
User Saved Number
Day COS
Night COS
Auto Hold
You may choose to first press an idle [CO line] or you may let the system automatically select
the line.
SPEED NO : __
5551212
LNR next
51800551212
SDN next
To Next Page
Loading...
