4-14 Authority Code - Traveling Class of Service
5. Dial the number to be stored in the bin.
6. Press [save]
7. Press [back] to return to Step 4 and continue programming speed dial numbers or
press [next] to return to the main menu, or press [chg] if the speed dial number was
incorrectly entered.
Additional information for Speed Dial
To enter a CO Line Flash in a Speed Dial bin, enter [FEAT] + [3]. The display shows “\”.
To enter a Pause in a Speed Dial bin, enter [FEAT] + [7]+[0]. The display changes to “P”.
To enter a bin chaining command in a Speed Dial bin enter [FEAT]+1+nn.
When the code [FEAT] + [7]+[0] or [FEAT] + [3] is entered into a speed dial bin they
occupy one digit position.
When the code [FEAT]+ [1]+nn is entered into a speed dial bin it occupies 3 digit
positions.
System Speed Dial bin 99 is reserved for External Call Forward, if available on your
system.
Authority Code - Traveling Class of Service
Description
If you have extended dialing privileges, you may access your same COS at a telephone
without extended dialing privileges. Long distance and restricted CO line calls can be
made from telephones that are normally restricted.
Operation
At the telephone without extended dialing privileges:
1. Press [FEAT]
2. Dial [5] + [5]
3. Dial your station number.
Basic and Enhanced Telephones
1. Perform the Operation Steps 1-3.
2. Dial your password.
3. You may now dial according to your COS.
Executive Telephones
1. Perform the Operation Steps 1-3.
2. An Executive Telephone will display:
3. Press [save]
Press [CLEAR] at any time to exit the programming mode. The Attendant Administrator
code may be programmed on any programmable feature button.
AUTHORITY CD __
bksp save chg
To Next Page
Loading...
