5-20 Transfer
Tra nsf er
Description
Transfer a call from your station to another station while connected to current call.
Operation
While on a CO Line call:
1. Press Hook Flash
2. Dial Station number within 5 seconds (call will be disconnected after 5 seconds have
elapsed if station number is not entered).
3. Hang up to complete the transfer.
While on an intecom call:
1. Press Hook Flash
2. Dial Station number
3. Hang up to complete the transfer.
Conditions
When a CO line call is transferred, the system rings the new station with external ring
signal.
When transferring a call, the held internal party becomes the new calling party and
hears Ring Back tone.
CO Line Call Transfer is allowed for idle or busy transfers.
An SLT cannot transfer a CO line call to a station that is in DND mode.
To Next Page
Loading...
