4-22 Call Forward
Follow Me
1. Press [follow]. The display shows::
2. Dial the station number from which calls are to be forwarded.
3. Press [save]. The display shows:
4. Dial the password for that station.
5. Press [save]. The display will momentarily display the following message while
confirmation tone is heard.
Conditions
If the station identified is in Do Not Disturb, Follow Me Call Forward will not be
allowed and the message STATION XX DND will be displayed.
Cancel
1. Any call forward mode can be canceled at the station that is forwarded by pressing
[FEAT] + [2]. The display will indicate DELETE FORWARD. Let’s assume that you are
Station 10 and Station 12 is Busy Call Forwarded to Station 16.
2. Call Station 12, which is busy on another intercom call.
3. Your call is forwarded to Station 16 and you hear ringback tone. At an Executive
Telephone, your display shows:
4. If Station 16 is also busy, you will hear a busy tone. At an Executive Telephone the
display shows:
At Station 16 ringing is heard and the display reads:
FOLLOW FROM
bksp save chg
CHK PSWD
bksp save chg
FOLLOW FROM xx
CALLING STA 16
cbck msg
STA 16 BUSY
cbck msg next
STA 10 CALLING
12 CFW
Call Forward can be pre-programmed on any feature button. When active, the lamp on the
assigned CALL FORWARD button will light on the Basic and Enhanced Telephones. On an
Executive Key Telephone, the display can be programmed to show the station or group to
which it is forwarded.
To Next Page
Loading...
