6-4 Program Mode Entry
Conditions
Only one Executive key telephone can be used at a time to perform system
programming or attendant administration. Otherwise, a warning message will be
received.
System Type appears following DB Programming entry and the DB Programming
password. Pressing [back] and [next] will not re-display this category.
Table 6-1 is a complete list of the programming default values for the DHS/DHS-E.
Table 6-1: Database Programming Table
FEATURES
RANGE DEFAULT
SYSTEM–STATION PROGRAMMING
System Type PBX-KEY PBX
STATION PARAMETERS 10–81 100–195 (none)
Day Class of Service 0–7 0
Night Class of Service 0–7 0
CO Line Assign 1–12 Y–N
700–717 Y–N
all Y
Receive Assign 1–12 Y–N
700–717 Y–N
all Y
(*) Ring Assign 1–12 700–717 day
nite both none
Sta 10 Sta 100
Account Code Forced Y/N N
Station Group 1–81
Warning Tone Y/N N
Drop Time-out Y/N N
Station Position 10–81 100–195 B1=10–33 B2=58–81
B1=100–147 B2=148–195
Voice Mail Port Y/N N
DSS Owner {FP3} 10-23 (none)
CO LINE ATTRIBUTES
CO LINE PARAMETERS 01–12 700–717
Dialing Type Selection Tone/Pulse Tone