Vodavi Starplus DHS - Private Line; Pulse to Tone Switch-Over

Private Line 4-85
1. Press that CO line button. A conference is established and the user that originated the
call is the conference controller. The controller display reads:
2. Your telephone display shows:
Where “ss” in each display indicates the station numbers that are joined in the call.
Conditions

If there are already four parties joined together, further attempts by other stations to
join the CO line conversation will receive busy indication.

A telephone must have a CO line button appearance of the busy CO line to join.
Refer to Conference for details of options from the controller telephone.
Private Line
Description
The Private Line assignment provides a quick and secure method of programming one or
more lines for access by only one station. If the associated Private Line is assigned to a
feature button at other stations, the button will light when busy but cannot be accessed
from Hold, answered on incoming calls, or used for outgoing access. Calls will not
forward and cannot be answered from Park location. The Private Line is used exclusively
by the station that is assigned the Private To station in system programming.
Conditions

Incoming calls signaling on a private CO line will ring its associated station regardless
of whether the CO line ring assignment is allowed in programming.

Private Line programming will override CO line ring and CO line receive.
Pul s e To To n e Swit ch - O ver
Description
When the system is connected to Dial Pulse (rotary) outgoing CO lines, you may manually
force the system to output DTMF tones for access to special services over the same Dial
Pulse CO line.
LNx ss ss
private forced
LNx ss ss