Automatic Busy Redial 4-15
4. Dial your password.
5. Press [save]. The display shows:
6. You may now dial according to your COS.
Conditions
When setting Traveling COS, the temporary COS accessed will be effective for one
minute before the original station COS is restored.
Features and programming, such as line access/ring/receiving assignment are not
transferred with temporary COS use.
Automatic Busy Redial
Description
Automatic Busy Redial (ABR) may be used to redial the last number. The system will
automatically dials the number and then monitors the line for a busy signal. If a busy
signal is detected, the system ends the call and attempts to dial the number again. The
redial cycle will continue until the maximum number of attempts designated in
programming is reached.
Operation
1. Press [FEAT]
2. Dial [7] + [8]. An Executive Telephone will display:
AUTHORITY ACCEPT
ABR requires the Option Module on the DHS for operation.
CO LINE X
- ->1/10
The system will continue redial attempts until busy tone is no longer detected, or the
maximum number of attempts is reached, or any other feature is used on the telephone.
To Next Page
Loading...
