4-44 Directory Dial <FP3>
Directory Dial <FP3>
Description
Enables station users to obtain a directory of station users and have the system dial the
extension shown in the display. The DHS system provides locations for up to 200 names
each consisting of a maximum of 12 characters. Directory Dial also enables users to
program a name along with a speed dial bin for use in later locating a speed dial number.
The system displays the name associated with a speed dial number on the LCD display so
that when the desired name is shown, the user may then have the system dial the
number.
Operation
1. Press [FEAT]
2. Dial [7]+[9]
3. Enter name using the key pad (refer to Table) or use volume keys to scroll through
names.
4. Press the soft key <show> to locate the most likely entry and volume keys to scroll
the names, until you locate the one you were trying to find:
Then press any soft key to dial, once the desired name is displayed.
To execute a speed dial number using directory dial:
1. If the destination is a speed dial number, the number stored in the speed dial bin will
be displayed
2. Press a soft key
3. Once an idle line is accessed, the number displayed is dialed.
bksp show chg
CHARLES_
bksp show chg
CHARLES_ ICM
15
CHARLES_ SPD
1234567
CALLING STA 15
cbck msg
To Next Page
Loading...
