4-54 Feature Button Inquiry
3. At an Executive Telephone, the display returns to the CO line connected display
following the flash time-out or 10 seconds later.
Conditions
The Flash code may be stored in any speed dial bin.
The Flash code may be stored in the Last Number Redial buffer. When you activate
redial, an Executive Telephone display will show a / (forward slash) to indicate the
Flash code.
The Flash time is programmable from 100ms to 1500ms in increments of 100ms (1/
10th of a second).
At an Executive Telephone, when the flash code is dialed a / (forward slash) will be
displayed temporarily and then the display will return to the previous message unless
other digits are dialed.
Single line stations cannot use system generated hook-flash.
Feature Button Inquiry
Description
You may review the programming for feature buttons at an idle Executive Telephone. To
review the programming, dial the Feature Button Programming mode.
Operation
1. Press [FEAT]
2. Dial [#] + [3]. The display shows:
3. Press the desired feature button to view its contents (code). In this example, button
20 is pressed.
4. Press [show]. The name of the feature is displayed.
5. The display then returns to the previous screen.
CO LINE 1 xx:xx
PRESS FEATURE BTN
F96__
show chg
MESSAGE WAITING
Buttons without feature programming will display BTN UNAVAILABLE.
To Next Page
Loading...
