6-8 Program Mode Entry
Database Programming Procedural Flow
The flowchart on the following pages can be used as a guide when performing database
programming. There are six programming functions as shown in Figure 6-1: Database
Programming Functions—Station and CO Line. Details of these programming functions are
shown in the subsequent figures. Please note the following conventions used in the
flowchart, similar to the soft buttons previously listed:
back: returns to the previous item within the programming function.
next: moves to the next item within the programming function.
hold: returns to the beginning of the programming function unless otherwise noted.
show: moves to the first item within the programming function.
To Next Page
Loading...
