Vodavi Starplus DHS - Station; Call Forward Modes

4-20 Call Forward
3. The setting is a toggle; the LCD shows either “FWD MSG DSP ON” or “FDW MSG DSP
OFF.”
4. When OFF, the LCD will show normal Time and Date display even when Call
Forwarding is invoked.
Station
Description
There are many Call Forward choices:

Forward calls when your telephone is idle.

Forward calls when your telephone is busy.

Use the Follow Me feature to receive calls at a temporary location and activate the
feature remotely from another station.

Forward your calls when there is no answer.

Combine busy and no answer call conditions for forwarding calls.

Forward Intercom calls, incoming CO and transferred CO calls.
Call Forward Modes
Basic and Enhanced Telephones
Use the following programming code combinations to activate the desired Call Forward
feature.
Executive Telephones
1. Press [FEAT]
2. Dial [2]. The display shows:
Regardless of whether the station where calls are being forwarded is a key telephone or
single line telephone, the user at the forwarded station will hear special Intercom Reminder
tone signifying that Call Forward is activated.
Table 4-3: Call Forward Programming
Idle Call Forward Press [FEAT] + [2] + [0] + Station number
Busy Call Forward Press [FEAT] + [2] + [1] + Station number
All Call Forward Press [FEAT] + [2] + [2] + Station number
Follow Me Call Forward Press [FEAT] + [2] + [3] + Station number + password
No Answer Call Forward Press [FEAT] + [2] + [4] + Station number + [x]
*
* x = 0, 1, 2, 3, or 4 where (0-4) = (10-50) seconds).
Combined Busy/No Answer Press [FEAT] + [2] + [5] + Station number + [x]
CALL FORWARD
na busy next