4-50 DSS Console <FP3>
To erase the contents of a programmable feature button:
1. Press [FEAT]
2. Dial [#] + [5]
3. Press the Programmable Feature Button.
4. Dial [0]
5. Press [HOLD]
Executive Telephones
To program DSS console buttons:
1. Press [FEAT]
2. Dial [#] + [5]. The display shows:
3. Press a programmable feature button. The current contents of that button is
displayed.
4. Press [show]. The name of the current feature stored is displayed.
5. Press [chg]. The display shows the following (DHS):
Or on the DHS-E:
Two feature button categories are available for feature button programming on the
DHS-E; DIR (directory) and feat (feature).
To program a CO line button:
1. Press [DIR]:
2. Dial the CO line number (700-717), refer to Table 4-6: CO Line Feature Button Codes.
3. Press [save]
PRESS DSS KEY
F96
show chg
MESSAGE WAITING
SELECT FUNCTION
CO LN STA FEAT
SELECT FUNCTION
DIR feat
DIR NO.:__
bksp save chg
CO LINE ___
bksp save chg
To Next Page
Loading...
