Vodavi Starplus DHS - Page 178

Feature Button Programming 4-57
3. Press a programmable feature button. The current contents of that button is
displayed. For this example, let’s use button 20.
The following sequence of steps applies to DHS-E only:
1. Press [show]. The name of the current feature stored is displayed.
2. Press [chg]. The display shows the following:
Three feature button categories are available for feature button programming: CO lines
(co Ln), Station (sta), and Feature (feat).
To program a CO line button:
1. Press [co Ln]:
2. Dial the CO line number. Table 4-6: CO Line Feature Button Codes. An intercom button
may also be assigned in this sequence. The allowable range includes CO lines, CO line
Groups and ICM button assignment.
3. Press [save].
To program a DSS/BLF button:
1. Press [sta]. The display shows:
2. Dial the station number.
3. Press [save]
F96
show chg
MESSAGE WAIT
chg
DIR NO.:__
bsp save chg
FTR CODE:__
bsp save chg
MESSAGE WAITING
SELECT FUNCTION
co Ln sta feat
CO LINE__
bksp save chg
STATION__
bksp save chg