4-74 Message Waiting
3. Press [msg].
4. Press [call me]. You will hear confirmation tone.
To answer a single Message Waiting:
1. Your telephone display shows the following and the Message Waiting lamp (if a
button is programmed) will flash:
2. Press [reply] to answer the message or [del] to delete the message without replying.
To answer multiple Message Waitings:
1. Your telephone display shows the following:
2. Press [more] to review the other messages.
To cancel a Message Waiting left at another station:
1. Press [FEAT].
2. Dial [✻] + [9] + [6].
3. Dial the station number where the message was left.
Conditions
The system will allow a total of 48 message waitings in the system at any one time.
At Executive Key telephones, the message waiting indication will not be removed
until [reply] or [delete] is pressed.
Each station can leave only one message waiting at any one station; for example,
Station (A) cannot leave 2 message waitings at Station (B).
Each station may receive more than one message waiting from various stations.
A feature button must be assigned on the Basic and Enhanced models in order to
receive visual Message Waiting indication.
Multiple messages are retrieved in the order that they were left.
MESSAGE TYPE
call me preprog
MSG TO STA xx
MSG FROM STA nn
reply del
MSG FROM STA xx
more reply del
To Next Page
Loading...
