4-102 Voice Over Busy
Executive Telephones
To place a Voice Over Busy:
1. Call any busy telephone. You will hear busy tone and your telephone displays:
2. Press [next]. The display shows:
3. Press [voice]. The display shows:
4. If the Voice Over Busy is rejected, the display will read VOICE REJECTED.
To accept a Voice Over Busy:
1. If while listening to the calling party, you wish to speak to the Voice Over Busy
initiator, press [MUTE] (Use [MUTE] to switch your transmitter between the original
call and the Voice Over Busy initiator).
To reject a Voice Over Busy:
1. The display shows:
2. Press [reject]. The display shows:
To allow Voice Over Busy calls:
1. Press [FEAT].
2. Dial [9] + [✳].
To deny Voice Over Busy calls:
1. Press [FEAT].
2. Dial [✳] + [9] + [✳].
Conditions
Voice Over Busy is not possible when the Call Waiting, Busy Forward or Busy No
Answer Forward features are enabled.
Voice Over Busy may be allowed or denied at any station.
If you are on a line and have Mute activated, the line will remain muted until the Voice
Over Busy is complete.
STA xx BUSY
cbck msg next
STA xx BUSY
camp voice
VOICE TO STA xx
STA xx VOICE
reject
REJECT VOICE
The Voice Over Busy feature code may be programmed on a programmable feature button.
To Next Page
Loading...
