Page: 2-46
WALKER MANUFACTURING COMPANY
July 2006
SERVICE INSTRUCTIONS
Ident Lubrication No.
No. Location Type Places
Ident Lubrication No.
No. Location Type Places
Lubrication Points - SB36 Snowblower
1 Spout Deflector Pivot Oil 2
2 Rotation Worm Oil 1
Handle Pivot
3 Foot Trigger Latch Grease 1
(Grease Slide Area)
4 Mounting Tube Sockets Grease 2
5 Lift Handle Pivot Grease 3
6 Counterweight Spring and
Lift Chain Clevis Pins Oil 4
7 Universal Joint Shaft Assembly Grease
* 1
8 Foot Trigger Pivot Oil 1
9 Right Angle Gearbox Oil
** 1
10 Drive Chain Oil 1
* Grease every eight (8) hours.
** Gearboxes are permanently lubricated and sealed requiring
no scheduled lubrication. Oil level should be checked only
when an oil leak is noted. Refer to Gearbox Lubrication in
this section.
To Next Page
Loading...
Need help?
General
