Page: 2-34
WALKER MANUFACTURING COMPANY
July 2006
SERVICE INSTRUCTIONS
Ident Lubrication No.
No. Location Type Places
Ident Lubrication No.
No. Location Type Places
Lubrication Points - Perfaerator
1 Deck Caster Wheel Fork Pivot Grease 2
2 Deck Caster Wheel Bearing Grease 2
3 Rod Bearing Bushing Grease 4
4 Drive Chain Oil
* 1
5 Eccentric Assembly Tine Grease
** 12
6 Actuator Rod Pivots Grease 4
7 Deck Support Arm Socket Grease 2
8 Universal Joint Shaft Assembly Grease
* 1
9 Actuator Link Latch Oil 1
10 Foot Trigger Pivot Oil 1
11 Engage Lever Pivot Grease 1
* Grease every eight (8) hours.
** Grease every eight (8) hours using Almagard #3752 lubricant
(Walker P/N 6685-7).
NOTE: The gearbox is permanently lubricated (oil filled) and
sealed requiring no scheduled lubrication. However, the
gearbox oil seal(s) should be checked every 25 hours for
indication of an oil leak.
To Next Page
Loading...
Need help?
General
