Page: 2-40
WALKER MANUFACTURING COMPANY
July 2006
SERVICE INSTRUCTIONS
Ident Lubrication No.
No. Location Type Places
Ident Lubrication No.
No. Location Type Places
Lubrication Points - Rotary Broom
1 Chain Drive Sprocket Oil 1
2 Chain Drive Shaft Grease 1
3 Gearbox Oil
* 1
4 Wheel Brackets Grease 2
5 Angle Adjustment Lever Pivot Oil 1
6 Driveline Grease 1
7 Driveline Support Pivot Oil 1
8 Angle Adjustment PlateOil 1
9 Universal Joint Shaft Assembly Grease
** 1
(Grease Slide Area)
10 Ground Contact Knob Eyebolt Grease 1
11 Drive Chain Oil 1
* Gearboxes are permanently lubricated and sealed requiring
no scheduled lubrication. Oil level should be checked only
when an oil leak is noted. Refer to Rotary Broom Gearbox
in this section.
** Grease every eight (8) hours.
To Next Page
Loading...
Need help?
General
