Page: 2-42
WALKER MANUFACTURING COMPANY
July 2006
SERVICE INSTRUCTIONS
Ident Lubrication No.
No. Location Type Places
Ident Lubrication No.
No. Location Type Places
Lubrication Points - Two-Stage Snowblower
1 Auger Sections Grease 2
2 Gearbox Oil
* 1
3 Cutting Edge Oil 1
4 Skid Shoes Grease 2
5 Gearbox Shaft Oil 1
6 Rotation Worm Grease 1
7 Reduction Chain Oil 1
8 Sprockets Oil 2
9 Parallel Bar Pivot Pins Oil 2
10 Universal Joint Shaft Assembly Grease
** 1
(Grease Slide Area)
11 Rotation Handle Pivot Oil 1
12 Plastic Anti-Friction Insert Grease 1
13 Chute Knobs Grease 2
14 Deflector Slide Area Grease 1
* Gearboxes are permanently lubricated and sealed requiring
no scheduled lubrication. Oil level should be checked only
when an oil leak is noted. Refer to Two-Stage Snowblower
Gearbox in this section.
** Grease every eight (8) hours.
To Next Page
Loading...
Need help?
General
