Page: 4-78
WALKER MANUFACTURING COMPANY
July 2006
SERVICE INSTRUCTIONS
SB36 Snowblower
Gauge Wheels or Skid Shoes
Inspect for paper adjustment of the gauge wheels or
skid shoes before each use.
IMPORTANT: Failure to maintain proper adjustment of
the gauge wheels or skid shoes can result in accelerat-
ed wear of the scraper blade.
Optional gauge wheels can be used instead of the
skid shoes to operate the snowblower on soft
surfaces. Adjust the gauge wheels or skid shoes as
follows:
1. Park the tractor on a level surface and lower the
snowblower.
2. Loosen the bolts that fasten the gauge wheels (or
skid shoes) to the snowblower.
Adjust Gauge Wheels
3. Position the gauge wheels (or skid shoes) so that
the snowblower is level and the scraper blade has
light contact or slight clearance with the surface.
4. Retighten the bolts that fasten the gauge wheels
(or skid shoes) to the snowblower.
Adjust Skid Shoes
Gauge Wheel
Skid Shoe
To Next Page
Loading...
Need help?
General
