Page: 3-9
WALKER MANUFACTURING COMPANY
July 2006
SERVICE INSTRUCTIONS
MAINTENANCE SCHEDULE CHART - RECOMMENDED SERVICE INTERVALS - IMPLEMENTS
Model Service Item Daily
25
Hours Yearly
Reference
Page
All Models:
Check Tire Chains (Optional) X
Check Gauge Wheels or Skid Shoes X
Check Tractor Tailweight X
Lubricate Grease Fittings and Oil Points X 2-15
Repaint Components/Parts X
Implement Hitch:
Check Implement Lift Switch Operation X
Check Hitch Locking Lever Function X
Dozer Blade:
Check Dozer Blade Cutting Edge Condition X
Check Dozer Blade Trip Spring Tension X
Check Dozer Blade Swivel Adjustment X
Rotary Broom:
Check Rotary Broom Brush Condition X
Check Broom Angle Adjustment Lever X
Check Broom Side to Side Level Adjustment X
Check Rotary Broom Ground Contact Knob X
Check Rotary Broom Gearbox Oil Seals X 2-16
Lubricate Rotary Broom Drive Chain X 2-17
Two-Stage
Snowblower:
Check Snowblower Auger Condition X
Check Snowblower Chute Rotation Handle X
Check Snowblower Deflector Position X
Check Snowblower Scraper Blade Condition X
Check Snowblower Gearbox Oil Seals X 2-17
Lubricate Snowblower Reduction Chain X 2-18
Debris Blower:
Check Debris Blower Chute Rotation Handle X
Check Debris Blower Deflector Position X
Check Debris Blower Gauge Wheel X
Check Debris Blower Impeller Condition X
Check Debris Blower Drive Belt X
CAUTION
Maintenance procedures requiring special training or
tools should be performed by a trained technician.
To Next Page
Loading...
Need help?
General
