Button Action/result
Using the selection cursor, select the
[in/out hand-held transmitter/central transmitter]
menu item.
Call up the function with ok.
The central transmitter searches for WMS devices. Then the
following menu is displayed.
NOTE The overview shows all WMS devices that were found
for the first time ( button for learning in is activated)
or have already been learned into the network (
button for learning out is activated).
Using the selection cursor, select the device that you wish to
learn out.
To check which device is currently selected, press the
button. The selected device waves.
Press the
button to learn out the device.
The following message appears.
Press the ok button and check whether all devices wave. You
can press the ok button as often as necessary.
System
To Next Page
Loading...
