WAREMA WMS - Learn limit positions;run time; Programming Motor Limit Positions and Run Times

890405_d•en•2015-12-01
We reserve the right to carry out improvements
110
WMS Central transmitter
9.2.3 Learn limit positions/run
time
Proceed as follows to the program motor limit positions and run times:
Button Action/result
 In the main menu, select the [System] menu and press ok.
 The [System] menu opens.
 Select the [Commissioning] menu here and press ok.
 The [Commissioning] menu opens.
 Use the selection cursor to select the
[Learn limit positions / run time] menu item.
 The following menu is displayed.
 Now select the [Learn limit positions / run time]
menu and press ok.
 The central transmitter searches for WMS devices. Then the
following menu containing the located devices is displayed.
Main menu
 System
 Commissioning
Learn limit positions / run time
System