EasyManua.ls Logo

WAREMA WMS - Central command; Safety contact; Time switch

WAREMA WMS
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
890405_d•en•2015-12-01
We reserve the right to carry out improvements
92
WMS Central transmitter
Menu item Setting range Description
Measure value, inside
temperature
The measured value is loaded from the
actuator when the [Settings] menu is
opened. To refresh the display, close the
[Settings] menu and open it again.
NOTE "Central command ON/OFF" is not supported by the system at this time.
9.1.3.8 Central command
This menu currently has no function.
Menu item Setting range Description
Central command ON/
OFF
Defines whether the product responds to a
central command or not
Measured value, central
command
The measured value is loaded from the
actuator when the [Settings] menu is
opened. To refresh the display, close the
[Settings] menu and open it again.
NOTE "Central command ON/OFF" is not supported by the system at this time.
9.1.3.9 Safety contact
This menu currently has no function.
Menu item Setting range Description
Safety contact ON/OFF
Defines whether the product responds to
the state of a safety contact or not
Measured value, safety
contact
The measured value is loaded from the
actuator when the [Settings] menu is
opened. To refresh the display, close the
[Settings] menu and open it again.
NOTE "Central command ON/OFF" is not supported by the system at this time.
9.1.3.10 Time switch
Menu item Setting range Description
Time switch ON/OFF
Activate/deactivate the function
Active/inactive when
absent
The automatic control function depends on
the "absent" variable
Switch time 1 Monday
00:00...23:59
- - -
Adjust the switch time, - - - deactivates the
switch time
Position 0...100 %
Position to which the product is moved at
the switch time
Slat angle -180...180°
Slat angle to which a slat product is moved
at the switch time
Comfort functions
Enable,
disable, un-
changed
Here you can activate or deactivate the
comfort functions at the switch time
Switch time 2 Monday
00:00...23:59
- - -
Adjust the switch time, - - - deactivates the
switch time
Position 0...100 %
Position to which the product is moved at
the switch time
Main menu
System
Products
Product type
Channel x
Settings
Central command
Main menu
System
Products
Product type
Channel x
Settings
Safety contact
Main menu
System
Products
Product type
Channel x
Settings
Time switch
System

Table of Contents

Other manuals for WAREMA WMS

Related product manuals