WAREMA WMS - Allocating a channel to a scene; Allocating Channels to Scenes

890405_d•en•2015-12-01
We reserve the right to carry out improvements
75
8.3.5 Allocating a channel to a
scene
To learn and call up the same comfort positions for several different prod-
ucts, the channels are grouped into a scene. Proceed as follows to allocate a
channel to a scene.
Button Action/result
 In the main menu, select the [Products] menu and press ok.
 The [Select product type] menu opens.
 Using the selection cursor, select the product type of the
channel that you wish to allocate.
 Press the ok button.
 All channels of the selected product type are displayed.
 Using the selection cursor, select the channel you wish to
allocate.
 Press the button.
 The context menu for the selected channel is displayed.
 Using the selection cursor, select the [Allocate] menu item.
 Call up the function with ok.
 The following menu is displayed.
Main menu
 Products
 Product type
 Context menu
 Allocate
 Allocate channel to a scene
Products