WAREMA WMS - Scenes; Menu settings

890405_d•en•2015-12-01
We reserve the right to carry out improvements
94
WMS Central transmitter
9.1.3.12 Scenes
Menu item Setting range Description
Scene 0
Position
0...100 %
- - -
Position to which the product is moved
when the scene is called up
Slat angle
-127...127°
- - -
Slat angle to which a slat product is moved
when the scene is called up
Scene 1
Position
0...100 %
- - -
Position to which the product is moved
when the scene is called up
Slat angle
-127...127°
- - -
Slat angle to which a slat product is moved
when the scene is called up
...
Scene 31
Position
0...100 %
- - -
Position to which the product is moved
when the scene is called up
Slat angle
-127...127°
- - -
Slat angle to which a slat product is moved
when the scene is called up
Position
Comfort
0...100 %
- - -
Position to which the product is moved
when the comfort position is called up
Slat angle
-127...127°
- - -
Slat angle to which a slat product is moved
when the comfort position is called up
Position
Absent
0...100 %
- - -
Position to which the product is moved
when the "absent" status is active
Slat angle
-127...127°
- - -
Slat angle to which a slat product is moved
when the "absent" status is active
Position
Central command
0...100 %
- - -
Position to which the product is moved
when a central command is sent
Slat angle
-127...127°
- - -
Slat angle to which a slat product is moved
when a central command is sent
9.1.3.13 Menu settings
Menu item Setting range Description
Display sun control
Display dawn/dusk
control
Display precipitation
monitor
Display wind monitor
Display ice monitor
Display temperature
control
Display central com-
mand
Display safety contact
Display time switch
Display manual opera-
tion
Main menu
 System
 Products
 Product type
 Channel x
 Settings
 Scenes
Main menu
 System
 Products
 Product type
 Channel x
 Settings
 Menu settings
System